Stuart's Bosch Tassimo Hot Drinks Machine Forum

Hi,
Had a misbrew incident with coffee and water going everywhere!
Once I'd cleaned the machine up it started pumping cold water at full pressure as soon as it's switched on. Using instructions from this website it looks as if the microswitch is not turning the barcode reader on.
Have left the machine to dry out; is there anything else I can do to fix it, otherwise it's going in a skip?

It doesn't sound like a faulty microswitch. I think water has got to the controlling circuit board. Maybe once fully dried out it might work again but I wouldn't be surprised if it's had it.

Sorry to not have good news,
Stuart

Hi Stuart,
Thanks for your response.
After 24 hours on top of a radiator all was well again. Hopefully this will give someone else a bit of positive news if something similar happens to them!
Mark